|
|
| Bridge power supply |
DC10 V±0.5 V within 120 mA (Changeable to DC2.5 V) with remote sensing applied. |
| Input range |
F.S. setting can be made with the input range from 0.2 mV/V ~ 3.1 mV/V
(Bridge power supply is at DC10 V.) |
| Zero adjustment range |
-0.1 mV/V ~ 2.4 mV/V |
| Non-linearity |
0.01 %F.S. |
| Temperature efficient |
Zero point ±0.4 μV/℃
Sensitivity ±0.003 %F.S./℃ |
| Input noice |
±0.3 μVP-Por less |
| A/D sampling |
100 times/s |
| Load display |
Load displayorDisplay of setting |
| Display range |
-1 000 ~ 11 000 (x 2, x 5 and x 10 can be available.) |
| Condition display |
RUN, A/Z, LOCK, HOLD, CHECK |
| Display times |
4 times/s (Changeable to 20 times/s, 50 times/s) |
| Open collector output function |
RUN, ERROR |
|
External control function
|
ZERO, A/Z, A/Z OFF, HOLD, LOCK, SEL.1, SEL.2 |
|
BCD output
(CSD-581-15)
|
BCD 5 digits, Parallel outpu with polarity (POL)
(Output ON with minus and outputs OFF with plus.)
P.C. (print command), OVR(over), ERROR,
Above are open collector outputs VCE=DC30 V, IC=DC20 mA at Max. |
RS-232C interface
(CSD-581-74) |
Baud rate : Selectable from 600, 1 200, 2 400,
4 800, 9 600, 19 200 or 38 400 bps
Data bit length : Selectable from 7 bit or 8 bit
Parity bit : Selectable from None, Even or Odd
Stop bit : Selectable from 1 bit or 2 bit
Terminator : CR + LF
Communication method : Half duplex
Synchronous method : Start-stop synchronous method
Communication data : ASCII code
Input/Output monitor with LED
Suitable plug : DE-9S-NR(made by JAE) |
| Operating temp./humidity range |
Temperature -10 ℃ ~ 50 ℃, Humidity 85 %RHor less(Non condensing) |
| Power supply voltage |
Power supply voltage : DC24 V (DC18 V ~ 36 V)
Power consumption Approx.9 W at maximum
(at DC24 V) |
| Outline dimensions(WxHxD) |
220 mm x 130 mm x 25 mm (Excludes protruding parts.) |
| Weight |
Approx. 250 g (without options) |