| Use power |
AC100V ± 10% 50 / 60Hz |
| Storage battery |
Memory data storage and, can be used for about 10 years by the drive for the installation state of the clock |
| Recorded contents |
Date and time |
Recording the start of the date hour and minute, date of when the date has been changed
at the time of the ※ data PC transfer, transfer the YearMonthDayHHMM of 10-minute intervals, the number of pulses transfer |
| Pulse number |
The number of pulses of 10 minutes
※ record is a 10-minute units. 1 data immediately after starting recording, record the number of pulses until the time of the next 10-minute increments |
| temperature |
Air temperature at the time of memory the number of pulses of 10 minutes |
| Corresponding pulse |
50000 pulse composite power meter
(CT pulse output type) |
| Temperature measurement |
Measurement range |
It is different from the use range of -10 ~ 60 ℃ ※ this device. |
| Measurement accuracy |
Due to the influence of ± 2 ℃ (accuracy guarantee range 0 ~ 40 ℃) ※ installation location, if different from the actual temperature |
| display |
Display section 4 1/2 digit LCD display |
| Configuration |
Clock function |
Set the current time of the built-in clock |
| Reservations start time |
Set the time to start recording from the time that has been set in advance |
| Body ID number |
Set the device number for the management of the body (0-19999) |
| data communication |
RS-232C or use the USB port |
| External dimensions |
189 (D) × 128 (W) × 38 (H) |
| weight |
About 2kg |
| accessories |
Pulse detection CT sensors, temperature sensors, USB cord, demand view (PC software), power cord |