| Number of channels |
Input × 4
Rotation speed/ external trigger input × 1 |
Output × 4
Monitor output × 1 |
| Input connector |
BNC (voltage/CCLD selectable) |
| TEDS (* Note) |
IEEE1451.4 (Ver.1.0 or later) |
| A/D conversion |
Quantization bit rate : 24 bit |
| Frequency range |
100 Hz, 500 Hz, 1 kHz, 5 kHz 10 kHz, 20 kHz, 40 kHz* (*40 kHz: option) |
| Frequency characteristics |
DC coupling : DC to 3 Hz ± 1.0 dB, 3 Hz to 40 kHz ± 0.5 dB
AC coupling : 1 to 3 Hz ± 1.0 dB, 3 Hz to 40 kHz ± 0.5 dB |
| Input voltage range |
0.01, 0.0316, 0.1, 0.316, 1, 3.16, 10 Vpk (7-step) |
| Dynamic range |
90 dB or more (frequency range 20 kHz, 1 V range, TYP) |
| Rotation input |
AC: sine wave or square wave
DC: rectangular wave with pulse width 5µs or more
Input voltage : 14.1 V or less |
| Trigger type |
External, internal, time |
| Pretrigger |
0, 1, 5 s (pretime from trigger event) |
| Calibration function |
TEDS direct /setup by sensor sensitivity value |
| File format |
ORF format (ONO SOKKI Record Format) |
| Recording media |
SD (256 MB), SDHC (4, 8,16,32 GB)
Recording media only after operation check*2 |
| Recording time |
Approx. 43 minutes (when 4ch recording)
Approx. 172 minutes (when 1ch recording)
(20 kHz range × 2.56, 24 bit, 2 GB memory card in used)
Up to 32 GB memory can be used, up to 2 GB of recording for one file |
| Power supply |
Battery cell (Type AA battery, alkaline or nickel hydride ) × 4
External DC : DC +10 to +18 V |
| Battery life |
5 hours or more(nickel hydride cell 2400 mAh in used)
4 hours or more(nickel hydride cell 1900 mAh in used)
(Frequency range 20 kHz, 4ch, CCLD ON) |
| Outer dimension |
199 (W) × 148(D) × 70(H) mm |