| Model |
Analog
Current type |
Cable type |
CD22-15A |
CD22-35A |
CD22-100A2 |
| Pig tail type |
CD22-15AM12 |
CD22-35AM12 |
CD22-100AM122 |
Analog
Voltage type |
Cable type |
CD22-15V |
CD22-35V |
CD22-100V2 |
| Pig tail type |
CD22-15VM12 |
CD22-35VM12 |
CD22-100VM122 |
| Center of measurement range |
15 mm |
35 mm |
100 mm |
| Measurement range |
±5 mm |
±15 mm |
±50 mm |
| F.S. (full scale) |
10 mm |
30 mm |
100 mm |
Light
source |
Medium/wavelength |
Red semiconductor laser, wavelength: 655 nm |
| Max. output |
390 μW |
1 mW |
Laser
class |
IEC/JIS |
Class 1 |
Class 2*1 |
| FDA |
Class 1*2 |
Class 2*2 |
| Spot size*3 |
Approx. 0.5 × 0.7 mm |
Approx. 0.45 × 0.8 mm |
Approx. 0.6 × 0.7 mm |
| Linearity |
±0.1% F.S. |
| Repeat accuracy*4 |
1 μm |
6 μm |
20 μm |
| Sampling period |
500 μs/1000 μs/2000 μs/4000 μs/AUTO |
| Temperature drift |
±0.02%/℃ F.S. |
±0.05%/℃ F.S. |
| Indicators |
Laser emission indicator (green)/zero reset indicator (red)/
output indicator (orange)/mode indicator (red) |
| External input |
Laser OFF, teaching, sample & hold, one-shot, zero reset (selectable) |
Analog
output |
Current type |
4 to 20 mA, Load impedance: 300 Ω or less |
| Voltage type |
0 to 10V, output impedance: 100 Ω |
| Control output |
NPN/PNP open collector (selectable by setting),
Max. 100 mA / 30 VDC, residual voltage 1.8 V |
| Supply voltage |
12 to 24 VDC ±10%*5 |
| Current consumption |
70 mA or less (at 24 VDC) |
| Connection type |
Cable type: Cable length: 2 m, ø4.5
Pig tail type: Cable with M12, 5-pin connector, 300 mm length |
| Protection circuit |
Reverse connection protection, overcurrent protection |
Environmental
resistance
|
Degree of protection |
IP67 (including joint of pig tail type) |
| Ambient temperature/humidity |
-10 to +50℃ / 35 to 85% RH (no freezing or condensation) |
| Ambient illuminance |
Incandescent lamp 3,000 lx or less |
| Vibration resistance |
10 to 55 Hz; double amplitude 1.5 mm;
2 hours in each of the X, Y, and Z directions |
| Shock resistance |
Approx. 50 G (500 m/s2),
3 times in each of the X, Y, and Z directions |