|  Specifications | 
        
            | Model | D-50 | D-50S | D-100 | D-100S | 
        
            | Range | 50mm | 100mm | 
        
            | Resolution | 0.01mm | 0.001mm | 0.01mm | 0.001mm | 
        
            | Accuracy (excluding quantized error)
 | 0.01mm | 0.004mm | 0.01mm | 0.005mm | 
        
            | Measuring force | Less than 3.0N | Less than 3.5N | 
        
            | Cable length | 2m | 
        
            | Mounting method | ø 20mm stem or fastening by M4 screws at two positions | 
        
            | Contact point | M2.5 × 0.45 Sø 2.4mm steel | 
        
            | Operating temperature | 0 - 40ºC | 
        
            | Weight | 450g | 520g | 
        
            | Output signal | 90º phase difference, 20µm pitch (R03-PB8M Tajimi connector) | 
        
            | Compatible standard counters | C-500 / C-700 / CM-5B | 
        
            | Accessories | Finger lever for lifting spindle ---> 1 pc 
 | 
        
            | Featuares |  If Spindle inner spring is removed, measuring force will be that of spindle itself (only when in upright position)
 D-50 , D-50S ---> 1.0N     D-100 , D-100S ---> 1.1N
 
  Recommended stand is PDS-2 | 
        
            | Option |  Level mounting clamp ( GB-50 ) 
  Customer must specify if application is up-side-down. The measuring force changes when the gauge is inverted.
 
 
 |