This tester is used to evaluate the falling weight endurance on coated film and point impact strength for plastic film. Attaching the test specimen between the die and the punch, the operator is to drop a weight from a certain height. After the weight has been dropped the operator is to check for transformations, cracks, and peels caused by the impact. The tester can also be assorted with a low temperature oven (L type).
Thông số kỹ thuật
| Falling Height |
50 to Max. 500 mm (Pitch 50 mm) |
50 to Max. 1,000 mm (Pitch 50 mm) |
| Falling Weight |
300 g, 500 g and 1,000 g |
1,000 g, 2,000 g |
| Punch |
R1/16", R1/8", R3/16" and R1/4" |
φ1/2" and φ0.625" |
| Die |
R1/16", R1/8", R3/16" and R1/4" |
φ0.64" |
| Test Plate |
Steel Plate, 200 × 100 × T0.6 mm |