Kính hiển vi điện tử đo độ cứng Brinell
RINELL:
1 - Diameter of the sphere (you can choose the value of the diameter of the sphere used for the
hardness test between 1, 2, 2.5, 5 and 10 mm)
2 - Load applied (from 1 to 3000 kg, or from 9,81 to 29430 Newton)
3 - Duration of the test
CALIBRATED SHEAR PIN:
- Type of load applied (dynamic or static)
- Type of indenter (normal or in carbide)
- Type of material on which the test has been made (steel or cast iron)
Settings of the possible measurements:
4 - To show the label of the measurement with information about the diameter of the sphere/load
applied/duration of the test
5 - To modify the measurement tolerance
6 - To show on the screen the latest 5 measurements
7 - Calibration of the brightness
It is also possible to select and automate some operations of external input, just pressing a single button, such as:
8 - To duplicate the image on the screen
9 - To measure the indent
10 - To save the image selected in the format, with the options and with the name wished
11 - To export in an Excel table the measurements made
12 - To close the image after the measurement after a fixed waiting time
13 - To warn if the space on the disk is not enough to save the image