| LCR-8205 Specifications |
| TEST FREQUENCY |
DC, 10Hz ~ 5MHz; 6 Digits, ±0.0007% |
| OUTPUT IMPEDANCE |
25 / 100 SELECTABLE |
| BASIC ACCURACY |
±0.08% |
| TEST SPEED |
MAX: 2 5ms(>10kHz), FAST: 50ms(>20Hz), MEDIUM: 100ms
SLOW: 300ms, SLOW2: 600ms |
| TEST SIGNAL LEVEL |
AC Voltage
AC Current
DCR Voltage |
10mV ~ 2Vrms (FREQ.≦1MHz), 10mV ~ 1Vrms (FREQ. > 1MHz or FREQ.≦1MHz and RO=25Ω)
100µA ~ 20mArms (RO=100Ω), 400µA ~ 40mArms (RO=25Ω)
1Vdc (40mA max.) |
| DCR Voltage |
1Vdc (40mA max.) |
| MEASUREMENT PARAMETERS |
Maximum four parameters can be measured and displayed at the same time
Impedance (Z), Inductance (Ls / Lp), Capacitance (Cs / Cp), AC Resistance (Rs / Rp), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Phase Angle ( θd / θr), Susceptance (B), DC Resistance (Rdc) |
| LIST MEASUREMENT |
Listed Steps
Listed Parameters
Trigger |
15
Freq/Vac/Iac/DC Bias/Comp/BIN
AUTO, REPEAT, SINGLE |
| SWEEP MEASUREMENT |
Swept Graphical
Swept Parameters |
Two of measurement parameters
Freq/Vac/Iac, Keep Trace |
| OTHER FUNCTIONS |
Auto Level Control (ALC)
DC Bias
Handler |
Standard
0 ~ ±12V
PASS, FAIL and OK, NG or BIN 1-9 |
| OTHER FEATURES |
Correction
V/I Monitor
Comparator
Buzzer
Average |
Open/Short/HF Load/Load
Vac, Iac, Vdc, Idc
Value, ∆, ∆%
OFF, Pass, Fail
1 to 64 |
| DISPLAY |
7" LCD color display (800 x 480) |
| INTERFACE |
USB/GPIB/LAN/RS-232/Handler/USB Host/TRIGGER Input |
| POWER SOURCE |
AC 100V~240V, 50/60Hz; Consumption: 65VA (max.) |
| DIMENSIONS & WEIGHT |
346 (W) x 145 (H) x 335 (D) mm; Approx. 3.3kg |