| ■ Input section |
|
Amplification section
|
Isolated unbalanced DC amplification |
|
Input signal
|
Phase-differential type torque detector output signal
|
|
Input impedance
|
Approx. 2 kΩ (when input signal amplitude at 2 Vpp or less)
|
|
Input frequency range
|
200 Hz to 50 kHz
|
|
Input signal amplitude range
|
0.2 Vpp to 15 Vpp
|
|
Connector
|
TRC116 - 23A10 - 7F
|
|
■ Setup section
|
|
Capacity
|
1 to 9999
|
|
Factor
|
1 to 65535
|
|
Unit
|
mNm, Nm, kNm
|
|
Number of detection gears
|
1 to 9999 P/R
|
|
N-0 compensation
|
Stored in each memory for CW and CCW directions
|
|
Response
|
Time constant can be settable among; 16 ms/31 ms/63 ms/125 ms/250 ms/500 ms/1 s/2 s/4 s/8 s/16 s/32 s/64 s
|
|
Number of display digits
|
Polarity + 4-digit or polarity + 5-digit, selectable
|
|
■ Measurement section
|
|
Measurement clock
|
4.195 MHz
|
|
Sample clock
|
Sampling time for 1 data: 1/256 Hz (approx. 4 ms)
|
|
■ Display section
|
|
Number of display digits
|
Polarity + 4-digit or 5-digit, selectable
|
|
Unit
|
mNm, Nm, kNm
|
|
Display gate time setting
|
1 s to 10 s (shared with a rotating section)or external gate
|
|
Accuracy
|
When combined with the detector (with 1 s gate time)
|
|
■ Output section
|
|
Analog output
|
Voltage output 0 to ±10 V/F.S.
(Attenuation setting of the F.S. is possible from 0.1 V to 10 V in 0.1 V steps.)
|
|
Response
|
16 ms to 64 s depending on the time constant setting
|
|
Accuracy
|
When used in combination with a torque detector (The display renewal rate is 1 s.)
|
|
Temperature drift
|
±0.01 %/F.S./ °C
|