| Measuring range |
Cell constant |
/cm |
0.01 |
0.1 |
1.0 |
Electrical
conductivity |
μS/cm |
0.000 to 2.000
0.00 to 10.00 |
0.000 to 2.000
0.00 to 20.00
0.0 to 100.0 |
0.0 to 200.0
0 to 1,000 |
| mS/m |
0.0000 to 0.2000
0.000 to 1.000 |
0.0000 to 0.2000
0.000 to 2.000
0.00 to 10.00 |
0.00 to 20.00
0.0 to 100.0 |
| TDS conversion |
mg/L |
0.00 to 2.00
0.0 to 10.0 |
0.0 to 20.0
0 to 100 |
0 to 200
0 to 1,0000 |
| Electrical conductivity measurement and TDS conversion measurement cannot be selected at same time. |
| Temperature |
˚C |
0 to 100 Resolution: 0.01˚C |
| Repeatability |
Electrical conductivity: ±0.5% full-scale or less
TDS conversion: ±1.5% full-scale or less
Temperature: ±0.1˚C (for equivalent input) |
| Linearity |
Electrical conductivity: ±0.5% full-scale or less
TDS conversion: ±1.5% full-scale or less
Temperature: ±0.5˚C (for equivalent input) |
| Transmission output |
4 to 20 mA DC Input/output insulated type
Maximum load resistance 600 Ω |
| Contact input |
One point Contact format: Non-voltage a contact
Contact function: Transmission output is held for closed contact input. |
| Temperature compensation range |
0 to 100˚C (but for 0˚C or less, 100˚C or more, extend and perform calculation) |