Sophisticated monitoring and analysis system prevents false indications by digitally separating partial discharges from electrical noise, on a pulseby-pulse basis.
Proven filtering and pattern recognition enhances noise separation, allowing for a reliable and objective detection of stator winding problems such as poor impregnation, overheated windings, coil movement in the slot, ineffective or deteriorating grading/semiconductive material problems, and contamination.
The system’s compatibility with the PDA technology allows users with existing sensor installations to commission the system without an additional outage.
Ensures a consistent testing interval, thereby improving the quality of the trends. The alarm features permit maintenance personnel to focus
on machines that exhibit unusual or high levels of partial discharge activity. This is attained by increasing testing frequency and using 24-window phase-resolved PD plots that help to identify the prevailing failure mechanism of stator winding insulation. Important operating conditions such as humidity, stator winding temperature, stator voltage, real and reactive power can be recorded and stored with the archived PD data. These parameters are useful for in-depth analysis and trending of the partial discharge activity.
The Alert testing range ensures minimal intervention by maintenance personnel. In response to a PD alert, users can review the pulse height analysis plots, and the 24-window phase resolved PD plots using basic interpretation to confirm the cause of the alert.
Alert Output is a dedicated relay fitted within the monitor enclosure that can activate a remote indicator of high PD alert conditions. The alert conditions are configurable through the operating software. The alert output may be connected to a plant monitoring system.
Modbus over Ethernet protocol included for interfacing to third party applications to obtain machine operating state and provide summary PD data
PDAlert Bantam instrument is a passive device, requiring no 50/60 Hz power supply
PARTIAL DISCHARGE DEVICE
• PDAlert PDIV>5000 V
• Minimum sensitivity: 10 mV
MAXIMUM VOLTAGE INPUTS
• Impulse: 5 kV
• 50/60 Hz AC: 690 V
SIGNAL OUTPUTS
• Scope Trigger : actual voltage impulse divided by 2000, into a 50 Ω load
• PD output : drives 50 Ω load