Trang chủ Đo Lường - Kiểm Tra Thiết bị hãng DAIEI KAGAKU

Thiết bị kiểm tra độ bền màu vải sợi DAIEI KAGAKU C-1, C-1D, DKS－2, HLD-150

Mã sản phẩm: |

Thương hiệu:

Giá gốc:

Giá khuyến mại: Liên hệ ( Đã có VAT )

Tiết kiệm: (0%)

Thiết bị kiểm tra độ bền màu vải sợi DAIEI KAGAKU C-1, C-1D, DKS－2, HLD-150

Thông tin sản phẩm

Thiết bị kiểm tra độ bền màu vải sợi DAIEI KAGAKU C-1, C-1D, DKS－2, HLD-150

Crock Meter [C-1（manual）, C-1D（motor driven）]
	Reference standard: JIS L 0849 ISO 105-X12 GB/T 3920/1997 AATCC 8/2005
	This apparatus is a tester for determining the colour fast- ness to rubbing. A rubbing finger is a circular rubbing surface measuring 16mm in diameter. There are 2 models, the type to which rubbing finger is made to go and come back mnually, and the type by motor driven.

Nitrogen Oxides Colour Fastness Tester [DKS－2]
	Reference standard: JIS L 0855 ISO 105-G01 GB/T 11039.1-2005
	This tester is a apparatus for determining the resistance of the colour of textiles of all kinds and in all forms to the action of nitrogen oxides produced during combustion of gas, coal, oil,etc., and when air is passed over heated filaments.

Leather Iron Rubbing Tester [HLD-150]
	Reference standard:

Launder Meter [L-8Z, L-8Z-T, L-12Z, L-12Z-T, L-16Z, L-16Z-T, L-20Z, L-20Z-T]
	Reference standard: JIS L 0844 ISO 105 AATCC 61-2006 GB／T 3921（1~5）
This apparatus is used mainly to estimate the colour fastness of dyed fabrics against washing. A specimen of the textile in contact with specified adjacent fabric is laundered, rinsed and dried. Specimens are laundered under appropriate onditions of temperature, bleachig and abrasive actiion such that the result is obtained in a short time. The abrasive action is ac- complished by the use of a low liquid ratio and an ap- propriate number of steel bals.The change in colour of the specimen and the staining of the adjacent fabric of fabrics are assessed by comparion with the grey scale.

Launder Meter [L-8Z, L-8Z-T, L-12Z, L-12Z-T, L-16Z, L-16Z-T, L-20Z, L-20Z-T]

Reference standard: JIS L 0844
ISO 105
AATCC 61-2006
GB／T 3921（1~5）

This apparatus is used mainly to estimate the colour fastness of dyed fabrics against washing.
A specimen of the textile in contact with specified adjacent fabric is laundered, rinsed and dried. Specimens are laundered under appropriate onditions of temperature, bleachig and abrasive actiion such that the result is obtained in a short time. The abrasive action is ac-
complished by the use of a low liquid ratio and an ap-
propriate number of steel bals.The change in colour of the specimen and the staining of the adjacent fabric of fabrics are assessed by comparion with the grey scale.

Rubbing Color Fastness Tester for Leather [PA-2Ba]
	Reference standard:

Perspiration Tester [PW-20]
	Reference standard: JIS L 0848、JIS L 0854 ISO 105-E04 AATCC 15、106、107 GB/T 3922
	This test is used to determine the fastness of oolored textiles, to the effects of acid perspiration. It is applicable to dyed, printed or otherwise colored textile fibers, yarns and fbrics of all kinds and to the testing of dystuffs as applied to textiles.

Rubbing Tester For Colour Fastness [RT-300 ]
	Reference standard: JIS L 0849 standards
	This apparatus is the most commonly used type for deter- mining the color fastness to rubbing in Japan. It employs the Ⅱtype of JIS L-0849. The surface of the test dyed cloth set on to the curved test surface of thid device and that of the white cloth fixed on to the rubbing finger are rubbed together.

Scorch-Iron Tester [TSI-100A]
	Reference standard: JIS L 0850、JIS L 0879 ISO 105－X11、ISO 105－P01 AATCC 92、AATCC 117 GB/T 6152、GB/T 5718
This tester is used to dtermine the potential damage caused by retained chlorine. In addition to this testing, it is adapted also for determining the resistance of the colour of textiles of all kinds and in all forms to the action of dry heat. Heating device, consisting of a pair of smooth parallel plates, equipped with an accurately controllable electrical heating system and giving a pressure on the specimen of 4 kPa±1 kPa.

Scorch-Iron Tester [TSI-100A]

Reference standard: JIS L 0850、JIS L 0879
ISO 105－X11、ISO 105－P01
AATCC 92、AATCC 117
GB/T 6152、GB/T 5718

This tester is used to dtermine the potential damage caused by retained chlorine. In addition to this testing, it is adapted also for determining the resistance of the colour
of textiles of all kinds and in all forms to the action of dry heat.
Heating device, consisting of a pair of smooth parallel
plates, equipped with an accurately controllable electrical
heating system and giving a pressure on the specimen of
4 kPa±1 kPa.