| Supply voltage 1) |
9V … 30V DC |
Dimensions |
see dimension drawing |
| Current drawn |
ca. 2mA |
Reference voltage output 3) |
5,00 Volt |
| Externally regulated supply voltage 2) |
5 Volt |
Temperature drift of the reference voltage |
< 25 ppm/K |
| Current drawn with external supply voltage 5V |
approx. 1mA |
Maximum current of the reference voltage output |
5mA |
| Maximum Operating Temperature |
+85°C |
Output resistance |
ca. 100 Ohm |
| Minimum Operating Temperature |
-40°C |
Protection |
IP 65 |
| Maximum Storage Temperature |
+90°C |
Weight (Sensor excluding mounting ring and cable) |
18,5 g |
| Minimum Storage Temperature |
-55°C |
Enviroment Humiditi |
0…100% r.F. |
| Signal-to-noise ratio at signal output (0…10kHz) |
<150µVss |
Electrical signal-to-noise ratio |
>85dB |
Transverse sensitivity
at 45° tilt |
<1% of measure-ment value |
Voltage Offset (at Cero degree tilt) |
2,5 Volt |
| Settling time (to 98% of the actual value) |
<0,3 s |
Maximum output voltage range |
0.05V ... 4.95V |
| Terminals |
3 (4) highly flexible cables, Øca.1mm, length 18cm
optionally: shielded cable Ø2,1mm |