The RX-FL Series is a digital push-pull gauge and has such features as: Converting analog data input from a load cell (*1) into digital data using an A/D converter, measuring the major values (*2) of switch feeling measurement, displaying the track values digitally, outputting data to external instruments, etc.
Read through this instruction manual carefully and make full use of the RX-FL Series.
The built-in battery (NiCd battery) has been charged before shipment. However, it may have been discharged during transportation. Connect the supplied AC adapter with the gauge in order to recharge the battery before using the gauge.
- Connect the supplied AC adapter with the AC adapter connector of the gauge, and plug the AC adapter into an 100 VAC outlet .(*1)
- When connect the AC adapter, and electricity is supplied by an outlet of AC 100V (*1), Start charge to exclusive battery (NiCd battery).(*2)
- Recharging stops automatically after completion of recharging. However, do not recharge the battery for 24 hours or more for safety. Normally, the battery in the low-charge condition will be fully recharged in approximately 7 hours. In the fully recharged condition, the gauge runs for approximately 12 hours continuously.
- It is possible to carry out measurement while recharging the battery, unless the battery voltage is excessively low.
Thông số kỹ thuật
| Product Type |
Digital |
Resolution (N) |
0.01(1gf) |
| Allowable Maximum Load (N) |
20(2kgf) |
Accuracy |
±0.2％F.S. |
| Sampling cycle(ms) |
5(100Hz) |
Number of display updates(Times/second) |
1、2、5、10、20 |
| Display |
LCD 6 digits (44x44 mm) |
Power Supply |
NiCd, AC adapter MODEL-761 (100 V)/762(220 V) |
| Mass(g) |
Approximately 450 |
Output |
Printer Output/Overload Output |