| Item |
Specification |
| Model Name |
RDT-250C |
| Applicable Circuit Board |
Up to 250W x 330L x 15H mm |
| Outer Dimension |
830(W)×557(D)×523(H)(mm) |
| Heating Method |
Upper-face : Extreme infrared radiation with hot air
Lower-face : Extreme infrared radiation |
| Cooling Method |
Exhaust damper continuous operation by flowing air or N2 air
(with flow adjustable valve) |
| Power Supply |
200V 50/60Hz 18kVA 3Phase |
| Air |
0.3 - 0.5MPa 100 liter/min (Maximum) |
O2 Concentration in Furnace
(when using N2) |
100ppm minimum |
| PCB Installation |
Net system or Carrier system (Selectable on request) |
| Upper-Heater |
Extreme infrared radiation with hot air heater : 7.2kW (Approx.240W x 30 block) * Adjustments can be made using the Matrix control system Hot air heater : 8kW (2kW x 4) |
| Lower-Heater |
Extreme infrared radiation heater : Approx. 2kW (330W x 6) |
| Temp. Accuracy |
Room temp. - 80C : +/-3C 80C - 330C : +/-2C |
| Measuring Temp. Range |
Room temp. - 330C |
| Measuring Points |
1 - 6 points |
| N2 Gas Supply Function |
100 liter/min. with flow regulating valve during operation. |
| Control |
Exclusive softwarefor Windows XP/2000 |
| Weight |
Approx. 110kg |