| Differential Pressure |
Resolution |
0.1 Pa |
| Display Range |
±999.9Pa、（Accuracy guaranteed range±1000Pa） |
| Accuracy |
±2.5% of rdg ±1Pa、５０Pa or lower±2Pa |
| Sensor Proof Pressure |
5 MPa |
| Dislay Unit |
Test Pressure |
kPa，MPa
(Non SI Unit for overseas use kg/cm2, PSI, bar, mmHg,他) |
| Leak Rate |
Pa, kPa, mL/s, mL/min, L/min, Pa・m3/s,
E-3 Pa・m3/s, Pa/s, Pa/min,＊Pa/s, ＊Pa/min
(Non SI Unit for overseas use mmH2O, mmHg, inH2O,Others) |
| K(Ve)（Leak Coefficient） |
mL, L (Non SI Unit for overseas use in3, ft3) |
| Leak Rate Display |
4 digits、Sampling Rate 10 times/sec |
| Leak Limit |
±999.99 max |
| Number of Channels |
32ch（0～31） |
| Timer |
999.9 sec（Resolution 0.1 sec） |
| Power Source |
AC100～240V±10%, 50/60Hz,70VA max |
| Ambient Temperature |
5～45 ℃ |
| Humidity |
80% RH or less / No dew condensation |
| Weight |
Controller: approx. 2.6kg、 Pneumatic unit: approx. 4.4kg |
| Test Pressure Source |
Clean and dry air regulated to the test presssure
Source pressure must be sufficiently higher than the test pressure |
| Pilot Pressure |
Set by using the pilot pressure filter regulator installed： Range: 400 to 700kPa |
| Port Size |
Ф6mm One-touch joint：Pilot pressure source, Test pressure source
Special joiint：WORK and MASTER port |
| CPU |
SH-2A 144MHz, DRAM8MB |
RS-232C
(D-sub 9pin) |
I/F fixed length
ID/F fixed length |
Test parameter as well as test results are transmitted |
| T/F fixed length |
Only test results are transmitted |
| Others |
Special formats |
| USBポート |
Test data |
Judgment, Leak, Test pressure, Channel #, Time, etc |
| Test parameter |
Test parameters of all the settings screens |
| Standard Accessories |
Pilot pressure filter regulator Quick mounting brackets , Control I/O connector, Power cord, Inspection records , Operation manual, Traceability documents |