| DP sensor and display (standard) |
Resolving power
Display range
Sensor range
Excess pressure on sensors
Display precision *1 |
0.1 Pa
±2500 Pa
±1000 Pa
±2000 Pa
5 MPa
±2.5% of rdg ±1Pa、However 50Pa following ± 2Pa |
| Test Pressure Sensor and Display |
Display precision |
±1% of F.S. ±1 digit (linearity, hysteresis, reproducibility) |
| Temperature properties |
±0.1% of F.S. / °C |
| Display units *2 |
Test Pressure: |
kPa, MPa (PSI, kg/cm2, bar, mbar, mmHg, cmHg, inHg) |
| Leak volume |
Pa, kPa, mL/s, mL/min, L/min, Pa・m3/s, E-3 Pa・m3/s, Pa/s, Pa/min,
(mmH2O, inH2O, mmHg, in3/min, in3/d, , ft3/h) |
| Leak volume display |
3 to 5 digits (floating point), sample rate: 10/second |
| Leak limit (standard) |
±999.9Pa or less |
| Number of Channels |
32ch（0～31） |
| Timer setting range |
999.9 seconds (resolving power: 0.1 second) |
| Power Source |
AC100 to 240V±10%, 50/60Hz, 80VAmax
Fuse (T2.5A 250V)
Dielectric strength and resistance AC1400V 10 sec, DC500V 50MΩ
Internal solenoid power supply: DC24V |
| Test pressure source |
Uses clean air.The original pressure must be sufficiently higher than the test pressure. |
| Pilot pressure source |
Applies 400 to 700kPa of clean air. |
| CPU |
ARM9 400MHz, DRAM 128MB |
| LCD/TP |
5.7 inch color LED 640 x 480 pixels (VGA) |
| Pipe connection diameter |
Rc(PT) 1/4 test pressure supply, pilot air supply, workpiece piping, master piping |
| Ambient temperature |
Operating temperature 5 to 45°C Storage temperature: -20 to 60°C
Consult if using in a high temperature environment. |
| Humidity |
80 %RH or less No dew condensation |
| Mass |
Approx. 14kg (standard specifications) |
Serial communications RS232C-based
(D-sub9-pin)
2 port |
I/F fixed length output |
Leak data and set values are outputted simultaneously |
ID/F fixed length output
Standard settings |
Leak data and set values are outputted simultaneously |
| T/F fixed length output |
Only leak data outputted |
| Other formats |
| USB Port |
Saving data |
Saves decisions, leak values, correction values, test pressure, WK#, CH#, and time on inserted memory.
(Automatic file creation every 24 hours) |
| Set values storage |
All channel settings, system settings, etc. |
|
| LAN Port |
Intend to include FTP server function |
| Maintenance/calibration port |
M10 x 1.5 (O-ring seal) |
| Electro-pneumatic regulator |
Repeatability: ±0.5% of F.S. and belowTemperature properties: ±0.16% of F.S./°C |
|
Control I/O connector, caps (2) for RS-232C, USB cover, test report, traceability documents, user manual |
| Ambient properties (IEC 6101-1) |
Overvoltage category II |
Protection class I |
|
|
| Peripherals |
Master chamber, leak master, bypass unit, external exhaust valve, etc. |