Dakota MX-3 Ultrasonic Thickness Tester Gauge is equipped with a two point calibration option, providing the user with extreme accuracy.
Another special feature of the MX-3 is the high speed scan mode. In this mode, the MX-3 takes 16 readings per second rather than 4 readings per second in standard measurement mode.
The readings are viewable while scanning.
Simply remove the transducer from the area being tested and the MX-3 will display the minimum thickness in the area scanned.
SUPPLIED WITH one of the following probes:
1/4 inch 5.00MHz standard probe, and is suitable for most materials, such as the thickness of steel, stainless steel and glass. Also measures aluminium and certain types of thin plastics.
Better results can be obtained by using the 1.00MHz probe for the thicker thicknesses of cast iron and extruded plastics such as polypropylene, polystyrene, polyethylene and PVC.
Using the 7.50MHz probe, the unit better measures the thicker thicknesses of high tensile steel and aluminium.
Supplied With: 1/4" Probe (transducer) with 1.2m lead Carry case.
Conformance Certificate Comes with one 1/4 inch Probe: 1.00MHz Probe, 5.00MHz Probe, 7.50MHz Probe