Bộ điều khiển nhiệt độ, độ ẩm RKC SR Mini HG SYSTEM（H-PCP-J）
Main specification
Refer to “SR Mini HG SYSTEM” for the configuration.
H-PCP-J module
- Basic function
Data management function: Operation data, System data
Unit diagnosis function: Configuration check of function modules
- Digital output
Number of outputs: 8 points
Output type: Temperature alarms 1 and 2 (ALM1, 2), Heater break alarm, Burnout alarm
Analog inputs 1 and 2 alarm (AI), Temperature inputs 1 and 2 (TI) alarm,
Loop break alarm, Temperature rise completion, FAIL. (configurable)
Output method: Open collector output (sink type)
- Communication
Interface: RS-422A / RS-485 / RS-232C
Protocol:
1) ANSI X3.28 (1976)2.5 B1
2) MODBUS
3) PLC commands (MAPMAN)
※ PLC commands are supported only on COM.port 1 and 2. Protocol is configurable among 1), 2) and 3).
<General Specification>
- Power supply voltage (Rating): 100 to 120Vac / 200 to 240Vac/ 24Vdc
- Allowable ambient temperature: 0 to 50°C
- Weight: approx.300g
- Safety standard:
UL UL61010-1
cUL CAN/CSA-22.2 NO.61010-1
CE Marking: Low Voltage Directive (LVD) EN61010-1 EMC Directive EN61326-1
RCM EN55011
H-DO-G Module
- Number of output: 16 points
- Output method: Open collector output (sink type)
- Functions: Master ch: Control output from (TIO module)
Output limit function
Output ratio function
Control output cycle time: 1 to 100 sec.
H-SIO-A module
- Input
Number of input: 1 point
Input type: 1) Voltage pulse input: High level voltage: 7 to 15Vdc, Low level voltage: 0 to 2Vdc
2) Open collector output
Sensor power supply: 12Vdc ±10%, 70mA or less
- Control method: 1) Open loop control
2) Closed loop control (Brilliant PID control with Autotuning) ※PI control available
- Control computation cycle: 0.1 sec.
- Control output: 1) DC voltage output: 0 to 1V, 0 to 5V, 0 to 10V,1 to 5V dc
2) DC current output: 0 to 20mA, 4 to 20mA dc
- Alarm function (2 points): Process alarm, Deviation alarm, SV alarm