|
|
| Bridge power supply |
DC10 V±0.3 V within 120 mA
(Changeable to DC2.5 V or 5 V) with remote sensing. |
| Input range |
F.S. setting can be made with the input range from 0.3 mV/V to 3 mV/V.
(At the time of bridge power supply is DC10 V.)
±F.S. setting can be available with the input range from ±0.6 mV/V to ±3 mV/V.
(At the time of selection of of +/- display mode at the function setting)
(At the time of bridge Power Supply is DC10 V) |
| Zero adjustment range |
±2.4 mV/V |
| Non-linearity |
0.01 %F.S. |
| Temperature efficient |
Zero point ±0.2 μV/℃ (Input conversion)
Sensitivity ±0.001 5 %F.S./℃ |
| A/D sampling |
100 times/s |
| Input filter |
4 Hz |
| Load display |
|
| Display range |
-1 000 ~ 11 000 (Changeable to x 2, x 5 or x 10)
-11 000 ~ 11 000 (Changeable to x 2, x 5 or x 10,
When +/- display mode is set with Function setting.) |
| Condition display |
RUN, A/Z, LOCK, HOLD, CHECK |
| Display of setting |
7segment fluorescence display tube and each 7 digits of S1, S2, S3 and S4 with 4.5 mm character height. |
| Bar meter display |
Displays the percentage of present load compared to the rated capacity (100 %) by 11 dots bar meter display. |
| Display times |
4 times/s
(20 times/s can be available depending on the setting.) |
| External control function |
ZERO, A/Z, A/Z OFF, HOLD, LOCK, A-SEL |
| Comparator function |
|
| Set value |
-999 999 ~ 999 999 |
| Set quantity |
S1, S2, S3, S4 points |
| Conversion times of comparator |
30 times/s |
| Contact output function |
4 points of S1, S2, S3 and S4 |
| Operating temp./humidity range |
Temperature -10 ℃ ~ 50 ℃, Humidity 85 %RHo r less (Non condensing) |
| Power supply voltage |
AC100 V (AC85 V ~ AC132 V) 50/60 Hz |
| Power consumption |
Approx.19 VA （without options, at AC100 V)
Approx.23 VA at maximum (with options.) |
| Outline dimensions(WxHxD) |
192 mm x 96 mm x 175 mm (excludes protruding parts) |
| Weight |
Approx. 1.9 kg (without options)
|