|
|
| Roter supply voltage |
DC24 V ±2 V, 2 A |
| Input signal |
Torque signal 5 kHz ~ 15 kHz (based on signal RS-485)
Rotation speed signal 0 Hz ~ 50 000 Hz |
| Output signal |
Analog output (Standard)
DC±10 V (at ± rated output of torque transducer)
Digital output (Option)
Select one from RS-232C, RS-422/485 , PROFIBUS or CANopen. |
| Zero adjustment range |
±2 %R.O. |
| Digital compensation |
Asymmetry compensation ±10％R.O.
Linearize compensation 10 points at the maximum
Twist direction reversing compensation
The direction of the twist and the output signal are reversed. |
| Non-linearity |
0.01 %F.S. (Voltage output) |
| CHECK |
Approx. 80 % of rated output (Set by function) |
| Frequency response range |
(Changeable to 1 Hz, 10 Hz, 30 Hz, 50 Hz, 100 Hz, 300 Hz, 500 Hz
or 1 kHz)
Above is 10 Hz ~ 1 kHz : -3 dB±1 dB, 1 Hz : -3 dB±3 dB |
| Torque display section |
Dsiplay of output 0 ~ ± 99 999 digital display (Green LED)
Display type Analog output, Torque
Condition display A/Z, LOCK, CHECK, H, M, ERROR
Display of unit Changeable to V, Nm or kNm
Display rate Approx. 20 times/s (Changeable to 4 times/s) |
| Rotation speed display section |
Display of output 0 ~ ± 27 500 digital display (Green LED)
Display type Rotation speed
Condition display LOCK
Display of unit r/min
Display rate Approx. 20 times/s (Changeable to 4 times/s) |
| External control input signal |
A/Z, A/Z off, LOCK, |
| External control output signal |
ERROR |
| Various function |
Digital filter, Sheet key lock, Changeover of calibration data,
Indication of luminous energy decrease. |
| Operating temp./humidity range |
0 ℃ ~ 50 ℃, 85 %RH or less (Non condensing) |
| Power supply |
Power supply voltage
AC100 V ~ AC240 V (Permisible variable range : AC85 V ~ AC264 V),
Power consumption Approx. 60 VA (at AC100 V) |
Outline dimensions
(W x H x D) |
68 mm x 209 mm x 252 mm (Excludes protruding parts) |
| Weight |
Approx. 2 kg
|