Specifications
| Pump |
Discharge Volume |
1.5〜2.5mℓ/stroke |
| Discharge Pressure |
0.3MPa |
| Motor |
Voltage / Current |
AC100Vφ1/50mA |
| AC200Vφ1/25mA（50Hz） |
| AC100Vφ1/42mA |
| AC200Vφ1/18mA（60Hz） |
| Output |
3W Synchronous Motor |
| Emergency Detection |
Oil Level Switch |
Contact Type A Contact (NO) ON at low level |
Contact capacity 0.5A、AC
DC200V/30W smaller |
| Operation Rating |
Continuous |
| Working Viscosity Range |
32〜1300mm²/s |
| Reservoir Capacity |
0.8ℓ |
| Weight |
1.2kg |
| Protection class |
IP54（CE Approved type） |
Directions for use
● Replace or clean the suction filter once a year.
Please see the adaptation table.
● Since oil changes its viscosity depending on the oil temperature in summer and winter, be careful to use it within the Working Viscosity Range. Please see the viscosity table.
● Do not use special additive oil, water-soluble oil or solvent.
● Regularly inspect the oil in use for contamination, etc. If any are found, immediately flush the tank and replace it with new oil.
● Please be careful about mistakes such as voltage.
● Do not overtighten the outlet fitting. Please refer to the tightening torque chart.
● Do not forcibly depress the oil level adjustment knob.
● Do not adjust the oil level when the oil level adjustment knob is raised. Please adjust at the lowest limit.