| Type |
Parallel line emitting reflective type |
| Model |
NPN |
LS-100CN |
| PNP |
LS-100CP |
| Measurement distance |
100 ±25 mm |
| Width of view (at measuring distance) |
17 mm (at 75 mm) to 27 mm (at 125 mm) |
| Light source |
Red semiconductor laser, wavelength: 655 nm,
max. output: 1 mW |
| Laser class |
IEC/JIS |
Class 2 |
| FDA |
Class 2*1 |
| Spot size*2 |
Approx. 0.3 × 32 mm |
| Linearity |
Z axis |
±0.1% of F.S. |
| Repeat accuracy*3 |
Z axis |
2 μm |
| Resolution*4 |
X axis |
25 μm |
| Sampling period |
Typical value: 5 ms
(when measuring the whole view in “Hi-res” mode),
max. speed: 0.5 ms |
| Display |
Dot matrix display |
| Indicators |
Power indicator (green), laser emission indicator (green) |
| External input |
Selectable from bank, trigger, hold, reset, laser OFF, and offset |
| Control output |
3 NPN/PNP open collector outputs, max. 100 mA/30 VDC (max. residual voltage: 1.8 V) |
| Analog output |
4 to 20 mA, out of measurement range: 24 mA
(max. load impedance: 300 Ω) |
| Communication I/F |
RS-485 half duplex (9.6 kbps to 4.0 Mbps) |
| Temperature drift (typical example) |
0.05% of F.S./℃ |
| Supply voltage |
12 to 24 VDC (±10%, including -5% ripple) |
| Current consumption*5 |
Max. 180 mA |
| Environmental resistance |
Degree of protection |
IP67 |