Trang chủ Đo Lường - Kiểm Tra Đồng hồ đo Teclock

Đồng hồ đo độ cứng cao su Teclock GS-701N, GS-701G, GSD-701K

Mã sản phẩm: |

Thương hiệu:

Giá gốc:

Giá khuyến mại: Liên hệ ( Đã có VAT )

Tiết kiệm: (0%)

Đồng hồ đo độ cứng cao su Teclock GS-701N, GS-701G, GSD-701K

HOTLINE: 0984.843.683, Email: hien@ttech.vn

Chúng tôi cung cấp các thiết bị đo lường sau của hãng Teclock

Thông tin sản phẩm

Đồng hồ đo độ cứng cao su Teclock GS-701N, GS-701G, GSD-701K

Specifications

	Model	Type	Application/Materials	Conform Standard	Spring Load Value (0-100)	Indentor Shape	Indentor Height	Weight(g)
Analog	GS-719N	Type A	General rubber (Medium hardness)	JIS K 6253 ISO 7619 ISO 868 ASTM D 2240	550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	2.50	200
	GS-719G	Type A (Peak Pointer Type)	General rubber (Medium hardness)		550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	2.50	208
	GS-719R	Type A φ18mm/stand combined	General rubber (Medium hardness)		550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	2.50	213
	GS-720N	Type D	Hard rubber (High hardness)		0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	2.50	200
	GS-720G	Type D (Peak Pointer Type)	Hard rubber (High hardness)		0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	2.50	208
	GS-720R	Type D φ18mm/stand combined	Hard rubber (High hardness)		0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	2.50	213
	GS-721N	Type E (AO)	(High hardness) Soft rubber	JIS K 6253 ISO 7619 ASTM D 2240	550-8050mN (56.1-821.1gf)	Hemisphere of SR2.50	2.50	200
	GS-721G	Type E (Peak Pointer Type)	(High hardness) Soft rubber	JIS K 6253 ISO 7619 ASTM D 2240	550-8050mN (56.1-821.1gf)	Hemisphere of SR2.50	2.50	208
	GS-719P	Type A (Pocket Type)	General rubber (Medium hardness)	JIS K 6253	550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	2.50	100
Digital	GSD-719K	Type A	General rubber, soft plastic	JIS K 6253 JIS K 7215 ISO 7619 ISO 868 ASTM D 2240	550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	2.50	313
	GSD-720K	Type D	Hard rubber, Plastic	JIS K 6253 JIS K 7215 ISO 7619 ISO 868 ASTM D 2240	0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	2.50	313
	GSD-721K	Type E (AO)	Very soft rubber	JIS K 6253 ISO 7619 ASTM D 2240	550-8050mN (56.1-821.1gf)	Hemisphere of SR2.50	2.50	313
	GSD-719K-R	Type A φ18mm/stand combined	General rubber (Medium hardness)	JIS K 6253 ISO 7619 ISO 868 ASTM D 2240	550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	2.50	320
	GSD-720K-R	Type D φ18mm/stand combined	Hard rubber (High hardness)	JIS K 6253 ISO 7619 ISO 868 ASTM D 2240	0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	2.50	320

Deep Hole / Long Leg Type

In some cases, such as the measurement surface of uneven or with a narrow flat area and the bottom of deep hollow, it may be impossible to achieve the proper results because of the difficult contact of the presser foot. The Deep Hole (H) type and the Long Leg (L) type make such measurements possible with a small or long presser foot. Both are supplied with Peak Pointer and the upper/lower limiters. The Long Leg type meets also to DIN 53505 standard.

Specifications

	Model	Type	Application/Materials	Conform Standard	Spring Load Value (0-100)	Indentor Shape	Presser Foot Diameter	Indentor Height	Weight(g)
Analog	GS-719H	Type A	General rubber / Deep hole type (narrow hole)	JIS K 6253, ISO 7619, ASTM D 2240	550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	φ12	2.50	140
	GS-719L	Type A	General rubber / Long leg type (thick hole)	JIS K 6253, ISO 7619, ASTM D 2240, DIN 53 505	550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	φ18	2.50	360
	GS-720H	Type D	Hard rubber / Deep hole type (narrow hole)	JIS K 6253, ISO 7619, ASTM D 2240	0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	φ12	2.50	140
	GS-720L	Type D	Hard rubber / Long leg type (thick hole)	JIS K 6253, ISO 7619, ASTM D 2240, DIN 53 505	0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	φ18	2.50	360
Digital	GSD-719K-H	Type A	General rubber / Deep hole type (narrow hole)	JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240	550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	φ12	2.50	194
	GSD-719K-L	Type A	General rubber / Long leg type (thick hole)	JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240, DIN 53 505	550-8050mN (56.1-821.1gf)	Truncated Cone of φ 0.79 with 35° angle	φ18	2.50	380
	GSD-720K-H	Type D	Hard rubber / Deep hole type (narrow hole)	JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240	0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	φ12	2.50	194
	GSD-720K-L	Type D	Hard rubber / Long leg type (thick hole)	JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240 DIN 53 505	0-44450mN (0-4533gf)	Conical Cone of R0.1 with 30° angle	φ18	2.50	380