- Selectable from among 4 analog outputs.[4~20mA・1~5V・0~5V・0~10V]
- Power and I/O lines are isolated from each other to enhance noise resistance.
- Can be mounted on the base plate or via the DIN rail adapter.
Can be combined with sensors |
Can be combined with all models of pressure sensors and load cells. |
Sensor specification |
Refer to the pages of pressure sensors and load cells. |
Calibration of amplifier and sensor |
VPMC amplifiers and pressure sensors or load cells have been calibrated as a pair.
Amplifiers and sensors have been calibrated as a pair under the same serial number. |
Specification
Accuracy |
Refer to the page of the pressure sensor or load cell to be combined with. |
Analog Output Response |
1msec. or less (Sensor characteristics not included) |
Linearity |
±0.1%F.S. (Sensor characteristics not included) |
Temperature Coefficient |
±0.02%F.S./°C (Sensor characteristics not included) |
Use Temperature Range |
0~50°C |
Use Humidity Range |
35~85%RH (No condensation) |
Dimensions |
Base plate type: 115(W)×35(H)×50(D)
DIN rail type: 95(W)×40(H)×50(D) |
Weight |
Approx. 190g |
Accessories |
Operation manual (1 copy)(Specify English or Japanese.)
Test report (1 copy) |