Kính hiển vi đo độ sâu M-Service CIL-ZX-USB
The ideal aid for depth measurement. The digital dial gauge measures the distance between two focal planes for no-contact measurement of hole depths in circuit boards or cell depths on anilox rollers and intaglio cylinders 
The measurement should be accomplished at very high magnification to limit the depth of field - a possible source of error. For this reason 20x and 30x lenses are included with the measuring system. The 1600 x 1200 pixel USB 2.0 camera provides for 900x or 1,350x final magnification on a 17" screen.
The virtually play-free, coaxial drive allows exact focussing on the focal plane. Important for optimum readings: Always focus the top and bottom focus level from the same side. 
This is the only way to ensure elimination of inaccuracies in the measurement resulting from a slight backlash. 
Here the coaxial illumination directly through the lens plays a significant role. This light guidance is the only feature that allows exact recognition of the focal planes. The fine focusing mechanism can be pushed to the side for quick adjustment. An LED ring light is included with the set for materials such as rubber. The nine LED's are arranged at an angle of 30° to the optical centre.
The MST stand provides a secure position on drums or flat material for depth measurement. 
An additional five millimetre X-adjustment at high magnification allows feed motion between the focal planes, when they can no longer be covered by the field of vision. 
In addition to visualisation the Metric Standard or Metric Plus measuring software allows 2D measurements, such as distances, angles, radii and areas. The drivers for the camera and measuring software can be installed on as many PC's and laptops as desired (software enabled via camera), making the system extremely flexible. Updates for the Metric software can be downloaded via the Internet download system at no cost.
An additional stand with 25 x 25 mm cross table and optional rotating table is available to allow use of the 2034-CIL-300-ZX as a laboratory system. 
This stand is very useful when performing depth measurements on small parts. In such applications the parts can be positioned precisely with the cross table. Further optional accessories include the two V-blocks, which can be inserted into the rotating table using a fitted pin in the bottom. This allows applications such as quickly and reliably measuring the depth of scratches on round parts without investing a great deal of time. The Cellcheck system is also suitable as a mobile laboratory for measuring polished micrograph sections. In this configuration the Cellcheck CIL-ZX system is supplied in a prestigious aluminium case, with recesses for the optional stand.