| Input section |
Applicable sensor
(sold separately) |
IP-292/296, IP-3000A/3100, OM-1200/1500, VP-202/1220, LG-9200, MP-900/9000 series, MP-981, EXT(PULSE), ECU crank angle signal(option) |
| Measurement range |
IP-292/296/3000A/3100:120 to 20000 r/min
OM-1200/1500:120 to 20000 r/min
VP-202/1220:120 to 20000 r/min
MP-900/9000 series:30 to 99999 r/min
MP-981:0 to 99999 r/min
LG-9200:0 to 99999 r/min
EXT(PULSE):0 to 99999 r/min
CRANK PULSE:120 to 20000 r/min |
| Input frequency range |
0.1 Hz - 120 kHz *1 |
| Display |
Display method
(display size) |
Fluorescent display tube (52.5 x 11.5 mm) |
| Display range |
0 to 99999 r/min *1 |
| Accuracy |
±0.01 %/F.S(±1 count)or less |
| Analog output |
| Output range |
0 to 10 V |
| Range setting |
1 to 99999 r/min(set in steps of 1 r/min) |
| Load resistance |
100 kΩ or more |
| Response |
Updates in less than 8µs after cycle becomes stable. |
| Resolution |
16 bit |
| Pulse output |
Output item
(selectable) |
DIRECT : Wave-shaped output
0.5[P/R] : Output r/min value to obtain 0.5 P/R
1[P/R] : Output r/min value to obtain
1 P/R 60[P/R] : Manually switch r/min value output to obtain 60 P/R |
| Signal level |
0-5 V logic signal(Lo:0.4 V or less, Hi:4.5 V or less) |
| Load resistance |
100 kΩ or more |
| Contact output |
| Item |
Engine run, over run |
| Setting range |
1 to 99999 r/min |
| Contact capacity |
DC 30 V/0.1 A |
Applicable connector
(cable side) |
Phoenix Contact MVSTBR2, 5/4-ST-5, 08 |
| Digital interface |
RS-232C / CAN(option) |