|
Input section
|
|
Input terminal
|
M3 free terminal screw |
|
Input impedance
|
10 kΩ or more |
|
Input format
|
Voltage or non-voltage |
| Input amplification |
AC or DC |
| Applicable detector |
Electromagnetic/magneto-electric/photoelectric detector, rotary encoder, proximity switch |
|
AC amplifier
|
- Signal waveform: Sine or Square wave
- Signal voltage range: Sine 0.2 to 45 Vrms, square wave: 0.6 V to 63 Vp-p
- Signal frequency range: 1 Hz to 100 kHz
|
|
DC amplifier
|
- Signal waveform: Square waveform having a pulse width at 5 μs or more.
- Signal voltage range: Hi level: +4 to +30 V, Lo level:-1 to +1 V
- Signal frequency range: 0.1 Hz to 100 kHz
|
|
Low pass filter
|
Selectable from OFF (100 kHz)/100 Hz/20 kHz |
| Pulse output section |
| Output voltage |
Hi level +4.5 V or more
Low level +0.5 V or less |
| Output logic |
Negative |
| Load resistance |
100 kΩ or more |
| Output terminal |
M3 free terminal screw |
|
Display
|
| Display device |
Fluorescent display tube (selectable of three-stage brightness, 6-digit display) |
| Display refresh time |
Selectable from 0.2 s (factory setting), 0.4 s, 0.5 s, 0.6 s, 0.8 s, 1.0 s to 10 s (in 1.0s step). |