Bộ điều khiển trọng lượng, Đầu cân Cobra 365 STAD

Instrument box (196x105x70 mm, hole 187x97 mm) for panel
mounting. Backlighted 5.2” TOUCH SCREEN LCD display.
IP 65 front panel protection rating.
The COBRA 365 not only integrates weight and speed variables but
also generates the instantaneous flow rate per hour, total weight and
the function of automatic flow rate regulator.
ON REQUEST:
- PROFIBUS protocol (it needs additional
module);
- USB HOST for Pen Drive USB;
- additional analogue input and output;
- ETHERNET interface module;
- 4IN / 8OUT additional module;
- 24 column printer.


Main features of COBRA 365
Maintaining the flow set point by adjusting IP analog
output, with an alarm output of flow out of tolerance;
- Continuous transmission of the instantaneous flow rate,
detected by analog output proportional to it.
- Ability to set, for batching, the values of presets, sets
and fly with pulse outputs to the achievement of values.
- Possibility of setting of the SET POINT via analog input;
optional extra analog output in
addition to the standard output
- Save points for the working curve of the doser when
used in combination with with non-linear extractors (eg
electromagnetic extractor).
- Calculation of the weight total and transmission
by impulse output; output can be delivered in a 24 column
printer mod. SP-190 via RS232 port.
- Programming of up to 15 different set points of work,
settable by BCD inputs.
- Able to freeze the analog output value, by means of
logic input, in order to avoid the initial pendulation of
system (which runs all 15 set point).
- Ability to display, during operation, I/O status, the
current weight, current speed, the pulse encoder and
the correction factor set.
- Procedures for the zero setting on working loaded belt
and automatic adjustment factor correction.
- Can be connected with PC / PLC using comunication
protocols ASCII, Modbus-RTU and Profibus (optional)