| Item |
Description |
| Sensor applied voltage |
DC10V/2.5V Output current: within 120mA 4-wire system Applied voltage digital adjustment |
| Sensor input range |
-3.0 ~ +3.0 mV/V |
| Gain adjustment |
Automatic adjustment through internal operation. |
Equivalent input
calibration range |
Setting Range: 0.500 mV/V to 3.000 mV/V. Error: Within 0.1% FS. |
| Display |
STN Color LCD (320 x 240 dots) ,Indicator value: ±99999 |
| Display unitt |
Weight: kg, g, t, Force: N, kN, Nm
Pressure: N/m2, Pa, kPa, MPa, bar
* "No-unit" setting is also feasible |
| A/D converter |
Speed: 2000 times/second 24 bit (binary) |
| Accuracy |
Non-linearity: within 0.02%FS ±1 digit (during 3.0 mV/V input); Zero drift: within 0.5μV/℃ RTI; Gain drift: 0.01%/℃) |
| Analog filter |
LPF (low-pass filter,-6dB/oct.)
30/100/300/1000 Hz digital adjustment |
| Analog monitor output |
Output level: Approx. 2V per 1mV/V, input Load-resistance: 2KΩ or more |
| Interface (built-in) |
RS-232C communication interface [Synchronous, Full duplex, Transmitting speed: 9600~57600 bps]
2-wire type serial interface for dedicated printer and external display [Transmitting speed: 600 bps] |
| Wave profile holding |
< Tracking & Sample Hold >
Peak/Bottom/P-P/Mean---Range setting
Max Peak Value,Min Peak Value,Point of inflection |
| External output signal |
HI/LO comparison output (HH, HI, OK, LO, LL) / RUN output / hold end output / Event output after graph plotting Vce=30V (max),Ic=30mA (max) |
| External input signal |
Work selection input / hold control input / digital zero input (DZ) / graph plotting control input / calibration selection input lc=10mA or lower |
| Power supply voltage |
AC100~240V (-15%/+10%) 50/60 Hz |