| Model |
KSL-T8 |
KSL-T2 |
| Power Voltage |
100VAC or 200VAC, Single-phase 50/60Hz |
100VAC or 200VAC, Single-phase 50/60Hz |
| Consumption |
Max．150VA |
Max．150VA |
| Allowable Temperature |
ambient ： -10℃～+50℃
（No freezing/condensation）
Inside tank ： -10℃～+80℃
（No freezing/condensation） |
ambient ： -10℃～+50℃
（No freezing/condensation）
Inside tank ： -10℃～+80℃
（No freezing/condensation） |
| Measuring Span |
Standard 20m
（40m Option） |
Standard 20m
（40m Option） |
| Measuring Method |
Pulse Counting |
Pulse Counting |
| Measuring Unit |
1 pulse/10cm,
or 1 pulse/1cm |
1 pulse/10cm |
| Measuring Accuracy |
±1cm / ±10cm |
±10cm |
| Motor |
Single-phase, Reversible,
Output 40W
30 minutes rating, with brake |
Single-phase, Reversible,
Output 40W
30 minutes rating, with brake |
| Body material |
AC |
SPC |
| Mounting Method |
JIS 5K125A |
JIS10K100A |
| Enclosure Rating |
IP67 |
Equivalent to IP33 |
| Output Signal |
Current signal
DC4～20mA（indicate remains）
DC20～4mA（indicate vacated portion）
（User can set up either one）
Pulse contact signal
1 pulse / 1cm
（No-volt signal）
1pulse / 10cm
（User can set up either one） |
Possible to control 4-20mA output by combining an optional control unit and P / I converter. |
| Output Contact |
Reset Contact/
for Remote Indication Counter,
ON at the time of reset
Failure Alarm Contact/
Flickers when the measuring
tape is cut off.
The contact is closed when
the weight is buried. |
Possible to control both upper and lower output by combining an optional control unit and P / I converter. |