Highly accurate liquid mass flow rate measurement
Calibration by the actual fluid flow using the mass method gives this flowmeter a high accuracy of ±0.2 % of the reading, which contributes to better productivity.
Traceability
After calibration by actual water flow at Azbil Kyoto, one of Azbil Corporation's key flowmeter plants, traceability is provided to the customer. (Applicable diameters: 10-50 mm.)
High accuracy measurement down to 5 % of the range
Since the mass flow rate for liquid is calibrated to a high accuracy down to 5 % of the flow rate range, this flowmeter can measure the flow rate accurately at low flow rates, and thus the customer does not have to change the flow rate range even if the flow rate decreases due to factory load variations.
Resistance to piping vibration due to torsion bar vibration system
Unlike ordinary Coriolis flowmeters that directly vibrate the tube, this flowmeter uses a torsion bar inside the detector to vibrate the tube indirectly. This method allows measurement without vibrating the entire tube so this flowmeter measurement system is resistant to piping vibration. Changes in density that occur when bubbles are mixed in the fluid due to cavitation or other factors can also be tracked.
Easy-to-handle separable converter
Separation of the converter and detector allows installation of the converter in an easily visible and safe location, making it easy to change flowmeter settings or read the display, and enhancing safety.
Sizes from small to large diameter
We offer detectors up to 50 mm in diameter using the testing equipment at Azbil Kyoto and up to 300 mm in diameter through a German testing facility. In this way we can support applications over a wide range of flow rates.