Technical data Coating Thickness Meter MEGA-CHECK
|
| Applications: |
Depending on the selection of the probe measurement of paint, varnish, plastic and galvanic layers on steel, measurement of insulating layers on non-ferrous metals with automatic recognition of the basic material |
| Standards: |
ISO 2178, ISO 2360, BS 5411, ASTM |
| Measuring probe: |
The measuring range is depending on the probe,
on steel and iron up to 30 mm (30,000 μm),
on NFE metals up to 6 mm (6000 μm).
Minimum area, minimum radius of curvature and calibration value
also depend on the probe. |
| Accuracy: |
less than 100 μm ± 1 μm, 100-1000 μm: ± 1%, 1000-2000 μm: ± 3%,> 2000 μm: ± 5% |
| Resolution: |
1-100 μm: 0.1 μm, 100-1000 μm: 1 μm,> 1000 μm: 10 μm |
| Measuring units: |
µm and mils |
| Environment temperature: |
0 - 50° C |
| Display: |
Graphic display |
| Multilingual menu navigation: |
German / English / Spanish / Dutch |
| Power supply: |
3x 1.5 V AA Mignon |
| Operating time: |
approx. 60 hours |
| Dimensions: |
200 x 95 x 41 mm |
| Weight: |
265 g (with batteries) |
For the MEGA-CHECK Profi and Master devices additionally:
|
| Data logger: |
10,000 measurements (In MEGA-CHECK Master divisible into 100 batches) |
| Statistics: |
Count / Maximum / Minimum / Average / Standard deviation |
| Calibration memory: |
3 calibration memories for storing individual calibrations /td> |
| Interface: |
RS232 interface with USB cable for communication with PC and printer |
For the MEGA-CHECK Master device:
|
| Analog display: |
Analog measured value display with continuous measurement |
| Scan function: |
for accurate measurement on rough or blasted surfaces |
| Duplex function: |
for the exact determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts (the zinc layer must be > 60 μm) |