PCE-DD-D is a Shore D durometer or hardness tester used to measure the Shore hardness of materials such as hard rubber, hard resin, acrylic, glass, thermoplastic and more. This Shore D hardness tester uses an impact rod with a 30 º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24 in. (Note: If a material sample does not meet the minimum thickness required, the sample should be reinforced on the back with more of the same material.)
Thông số kỹ thuật
Measurement range |
0 ... 100 Shore D |
Resolution |
0.5 Hardness - Grade |
Accuracy |
±2 Hardness - Grade |
Depth of indentation |
0.0 ... 2.5 mm /
0.0 ... 0.01 in |
Pressure force |
5 kg / 11.02 lbs |
Indenter |
30° |
Dimensions |
85 mm x 60 mm x 25 mm /
3.3 in x 2.36 in x 0.4 in |
Power supply |
1 x 1.5V (SR44) |
Weight |
300 g / < 1 lb |