| SKF m20 performance |
97 kg (213 lb) |
| Voltage, V/Hz |
TIH 100M/230V |
230V/50-60Hz |
| TIH 100M/MV |
400-460V/50-60Hz |
| Work piece |
Maximum weight |
120 kg (264 lb) |
| Maximum bore diameter |
20 - 400 mm (0.8 - 15.7 in.) |
| Temperature control |
Range |
0 - 250 °C (32 - 482 °F) |
| Magnetic probe |
Yes, K-type |
| Accuracy (electronics) |
± 2 °C (± 3,6 °F) |
| Time control |
Range |
0 - 60 minutes |
| Accuracy |
± 0,01 sec. |
| Maximum temperature (approx.) |
400 °C (750 °F) |
| Thermometer mode |
Yes |
| Bearing mode |
Yes |
| Power reduction |
2-step; 50 - 100% |
| Demagnetisation according to SKF norms (automatic) |
Yes (<2 A/cm) |
| Can heat sealed bearings |
Yes |
| Can heat pre - greased bearings |
Yes |
| Error guiding codes |
Yes |
| Thermal overload protection |
Yes |
| Maximum magnetic flux |
1,7 T |
| Control panel |
Key board with LED in remote control |
| Operating area (w × h) |
155 × 205 mm (6.1 × 8.0 in.) |
| Coil diameter |
110 mm (4.3 in.) |
| Dimensions (w × d × h) |
570 × 230 × 350 mm
(22.4 × 9.0 × 13.7 in.) |
| Total weight, including yokes |
42 kg (92 lb) |
| Maximum power consumption |
3,6 kVA (230V) |
| Number of standard yokes |
3 |