| Specification / Model |
Tec3D-01F |
Tec3D-02F |
Tec3D-05F |
| Capacity |
10N/1kgf |
20N/2kgf |
50N/5kgf |
| Minimum load display digits |
0.001N/0.1gf |
0.01N/1gf |
0.01N/1gf |
| Load accuracy |
Within ± 0.5% of indicated value |
| Length resorution |
Z-axis=0.001mm X-axis=0.001mm Y-axis=0.001mm |
| Displacement accuracy |
±20μm+0.0001L（mm） |
| Test speed |
0.1～600mm/min |
| Maximum measurement length |
Z-axis Height-adjustable range：90mm,Measurement axis moveable working range：80mm |
| Measurement content |
The forward peak value, the bottom value, backward peak value, the bottom value, click load value, click rate, hysteresis, contact ON, OFF-point detection value, etc. |
| The maximum number of repetitions |
999999 Times |
| The maximum measuring the number of data |
X-Y coordinate point setting 300 points palette coordinate setting of 100 points (up to a total of 30000 points) |
| control method |
Full control of the personal computer, remote control |
| X-Y-axis travel range |
X=100mm（±50mm） Y=130mm（±65mm） |
| X-Y-axis maximum moving speed |
6000mm/min |
| X-Y-axis stopping accuracy |
±20μm+0.0001L（mm） |
| X-Y-axis repeatedly stopping accuracy |
±10μm |
| Control content |
0.01mm/0.10mm/1.00mm Inching, start position return, the start of the test, the test stop |
| Protection circuit |
Limit stop, overload stop, emergency stop SW |
| Drive mechanism |
Precision ball screw and a stepping motor |
| Table Size |
W110×D140mm |
| Communication system |
USB connection |
| Size |
W382×H580×D365 |
| Weight |
approx.35kg |
| Power source |
AC100～240V |