Máy thử kéo nén lò xo Digitech STP-5, STP-5S
A torsion spring load testing machine with the same basic properties as the ASP series of compression and tension spring testing machines.
The torsion spring has a special angle calculation method during the test. By inputting basic data, a reasonable torsion spring placement method can be automatically calculated. The setting can be performed according to the panel instructions.
The STP series also has a shuttle handwheel device, which allows the user to rotate and control the test bench freely with its fingertips, enabling it to fully exert its excellent operating performance.
| Specification / Model |
STP-5 / STP-5S |
STP-10 / STP-10S |
STP-50 / STP-50S |
| Capacity |
50N（5kgf） |
100N（10kgf） |
500N（50kgf） |
| Measurement unit |
N,gf |
N,gf |
N,kgf |
| Torqueunit |
Nmm,Ncm,Nm /
gfmm,gfcm,gfm |
Nmm,Ncm,Nm /
gfmm,gfcm,gfm |
Nmm,Ncm,Nm /
kgfmm,kgfcm,kgfm |
| Resolution |
0.001Nmm |
0.001Nmm |
0.01Nmm |
| Measurement angle |
0.1～7200.0deg |
0.1～7200.0deg |
0.1～7200.0deg |
| Test speed |
10～1800deg/min |
10～1800deg/min |
10～1800deg/min |
| X-AXIS |
±25mm |
±25mm |
±25mm |
| Y-AXIS |
60mm |
60mm |
60mm |
| Z-AXIS |
80mm |
80mm |
80mm |
| Testing machine standard |
JIS B 7738"Verification of the coil spring compression and tensile testing machine" class 0.5 compatible |
| Transportation |
AC servo motor |
| Safety measures |
Mechanical limit stop / Over load stop / emergency stop SW |
| Communication method |
USB1.1 |
USB1.1 |
USB1.1 |
| Dimension |
W490×H620×D490 |
W490×H620×D490 |
W490×H620×D490 |
| Weight |
approx.65kg |
approx.65kg |
approx.65kg |
| Power source |
AC100 or 220V |
AC100 or 220V |
AC100 or 220V |
※Specifications are subject to change without notice.