| Specification / Model |
Tec3DW-01F |
Tec3DW-02F |
Tec3DW-05F |
| Capacity |
10N/1kgf |
20N/2kgf |
50N/5kgf |
| Minimum load display digits |
0.001N/0.1gf |
0.01N/1gf |
0.01N/1gf |
| Load accuracy |
Within ± 0.5% of indicated value |
| Length resorution |
Z-axis=0.001mm X-axis=0.001mm Y-axis=0.001mm |
| Displacement accuracy |
±20μm+0.0001L（mm） |
| Test speed |
0.1～600mm/min |
| Maximum measurement length |
Measurement axis movable range：130mm |
| Measurement content |
The forward peak value, the bottom value, backward peak value, the bottom value, click load value, click rate, hysteresis, contact ON, OFF-point detection value, etc. |
| The maximum number of repetitions |
999999 Times |
| The maximum measuring the number of data |
X-Y coordinate point setting 300 points palette coordinate setting of 100 points (up to a total of 30000 points) |
| control method |
Full control of the personal computer, remote control |
| X-Y-axis travel range |
X=450mm（±225mm） Y=200mm（±100mm） |
| X-Y-axis maximum moving speed |
6000mm/min |
| X-Y-axis stopping accuracy |
±20μm+0.0001L（mm）以内 |
| X-Y-axis repeatedly stopping accuracy |
±10μm |
| Control content |
0.01mm/0.10mm/1.00mm Inching, start position return, the start of the test, the test stop |
| Protection circuit |
Limit stop, overload stop, emergency stop SW |
| Drive mechanism |
Precision ball screw stepping motor servo motor |
| Table Size |
W460×D210mm |
| Communication system |
USB connection |
| Size |
W676×H790×D510 |