| Use power |
DC110V / 125V ± 10% |
| Voltage output |
|
DDC10 ~ 30V (H range) / 25 ~ 75V (L range) |
| Output current |
17A (0.2 seconds), 1A (continuous) |
| Output control |
"ON" between the input -N output at the switch
"OFF" switch in the OFF -N between the output |
| voltmeter |
199.9V (resolution 0.1V) |
| Measurement accuracy |
± 0.5% rdg ± 5dgt |
| Sampling rate |
2.5 times / sec. |
| Contact measurement function |
Measurements CH |
3CH |
| Measurement time |
0 ~ 1000ms (resolution 0.1Ms)
0 ～ 10000Ms (resolution 1ms) |
| measurement error |
0.01% rdg ± 0.3ms (resolution 0.1Ms)
0.01 Pasento rdg ± 6Ms (resolution 1ms) |
| Detecting circuit |
Contact input detection voltage DC24V measure current up to 30mA |
| Record start condition |
Measurements start when you press the "ON" or "OFF" of the voltage output operation |
| Contact status display function |
When measuring contact is closed state, the input lamp (red) lights under each terminal
during the measurement contacts are open-circuit condition, each terminal under switching lamp (green) is lit |
| display |
20-digit 4-line LCD display |
| Print out output |
Built-in printer (paper width 58mm)
operating time, printing a non-assortment time at the printer |
| External dimensions |
250 (D) × 480 (W) × 260 (H) mm |
| weight |
About 10.3kg |
| accessories |
Printer paper × 2 Volume, fuse, manual |