| Use power |
3 power supply system (built-in battery, the DC external power supply, AC external power supply) |
| Internal battery |
Continuously for approximately 1.5 hours in a lead-acid battery (DC12V, 1 this 4.5Ah) output time 30kV generator (no load) |
| DC external power supply |
DC12V (11V ~ 13.5V) power supply capacity 10A or more
* that the power of the output terminal is not grounded |
| AC external power supply |
AC100V ± 10% 50 / 60Hz |
| Output voltage |
DC0 ~ 0 / -3kV / -30kV (continuously variable) (negative polarity)
voltage switching, because of the erroneous operation prevention, switches when the voltage adjustment knob was in a state of "0" position. If switching is normally performed voltage range lamp lights up. |
| Output current |
2.5mA (short-circuit), 500μA (when -30kV occurs)
1.3MA (when -20.7kV occurs) |
| Analog voltmeter |
0 ~ 3kV / 30kV (2 range) with a 1.0 grade mirror
* 30kV range 20700V to the red line, green to 2250V line |
| Analog ammeter |
1/10 / 100μA / 1 / 10mA 1.0 grade with mirror (also serve as battery check of the meter) |
| Voltage recorder output |
1kV in DC10mV |
| Output accuracy |
Within ± 5%
* that the input impedance of the recorder is 1MΩ or more |
| Current recorder output |
1μA in DC10 / 100mV |
| Output accuracy |
Within ± 2%
* that the input impedance of the recorder is 1MΩ or more
* 10mA range is the output of each range 1/10.
* SHORT range is not output. |
| charging |
AC external power supply (AC100V ± 10% 50 / 60VHz) |
| External dimensions |
250 (D) × 390 (W) × 250 (H) |
| weight |
About 13kg |
| accessories |
Test code set (with storage bag) owner manual case cover discharge resistance bar |