| Differential pressure |
Minimum display |
0.1Pa（Standard） |
| Display range |
±999Pa |
| Excess pressure on sensors |
5Mpa |
| Leak volume display range |
0.00～±999mL/min（Auto range） |
| Alarm setting range |
0～±999 |
| Number of Channels |
16 |
| Timer setting range |
0～999.8s （Setting is infinite） |
| Power Source |
AC100～240V±10%, 50/60Hz, 70VAmax |
| Test pressure source |
Uses clean air. The original pressure must be sufficiently higher than the test pressure. |
| Pilot pressure source |
Applies 400 to 700kPa of clean air. |
| Pipe connection diameter |
Rc1/4 (air pressure source, workpiece piping, master piping), 6mm one-touch joint (pilot air source) (the pilot air source of pressure range M, L are connected to the air pressure source with a 6mm tube.) |
| Transmission function |
Serial port RS-232C (printer mode setting possible) |
| Ambient temperature/humidity |
5 to 40°C/80%RH or less, however no dew condensation |
| Weight |
Approx. 6.3kg (H type: approx. 8kg) |
| Standard fittings and accessories |
(Fitting to main body) regulator, oil mist separator, filter regulator for pilot pressure
(Accessories) Quick mounting bracket, interface connector, power cord, inspection report, user manual, traceability documents
|