|
DPS
|
Resolution |
1 Pa |
| Display Range |
±9.999kPa (Accuracy guaranteed range ±10kPa) |
| Accuracy |
±5% of rdg ±1Pa (500Pa or lower: ±2Pa) |
| Proof Pressure |
20 MPa |
|
Unit
|
Test Pressure
|
kPa, MPa |
| (kg/cm2, PSI, bar, mmHg, etc) |
|
Leak
|
Pa, kPa, mL/s, mL/min, L/min, Pa・m3/s, |
| E-3 Pa・m3/s, Pa/s, Pa/min, *Pa/s, *Pa/min |
| (mmH2O, mmHg, inH2O, etc) |
| K(Ve) |
mL, L (in3, ft3)
|
| (Leak Coefficient) |
| Leak Display |
4 digits, Sampling rate: 10 times/sec |
| Leak Limit |
Up to ±999.9Pa |
| No# of Channels |
32ch (0 to 31) |
| Timer |
999.9 sec (Resolution 0.1 sec) |
| Power Source |
AC100～240V±10%, 50/60Hz,70VA max |
| Ambient Temperature |
5 to 45 ℃ |
| Humidity |
80 %RH or less / No dew condensation |
|
Weight
|
Controller: approx. 2.6 kg
Pneumatic Unit: approx. 15 kg |
| Pressure Source |
Clean and dry air.
Source pressure must be sufficiently higher than the test pressure |
| Pilot Pressure |
Clean and dry air, regulated between 500 to 700kPa |
|
Connecting Port
|
Pilot pressure：Rc1/4 |
| Test pressure：Swagelok Ф6mm (WORK & MASTER port) |
| CPU |
SH-2A 144MHz, DRAM8MB |
|
RS-232C
(D-sub 9 pins)
|
I/F fixed length |
Test parameters as well as test results are transmitted |
| ID/F fixed length |
| T/F fixed length |
Only test results are transmitted |
| Others |
Special formats |
|
USB Port
|
Test Data
|
Judgment, Leak, Test pressure, Channel#, Timers etc. |
| Test Parameter |
Test parameters of all setting screens |
|
Standard Accessories
|
Pilot pressure filter regulator, Quick mounting brackets, |
| Control I/O connector, Power cable, Inspection record, |
| Operation manual CD, Traceability documents |