Differential pressure |
Resolving power
Precision guaranteed range
Excess pressure on sensors
Differential pressure |
0.1 Pa
±1000 Pa
5 MPa
±2.5% of rdg ±1Pa, however 50Pa or below is ±2Pa |
Display units |
Test Pressure: |
kPa、MPa
(Non-SI units available for overseas: PSI, kg/cm2, bar, mbar, mmHg, cmHg, inHg, etc.) |
Leak volume |
mL/min, L/min, mL/s, Pa/s, Pa/min, Pa, kPa, Pa・m3/s, E-3 Pa・m3/s, etc.
(Non-SI units available for overseas: mmH20, mmHg, inH20, etc.) |
Displayed leak volume |
3 to 5 digits (floating point), sample rate: 10/second |
Number of Channels |
32ch(0~31) |
Timer setting range |
999.9 seconds (resolving power: 0.1 second) |
Power Source |
AC100~240V±10%, 50/60Hz, 80VAmax |
Test pressure source |
Uses clean air.The original pressure must be sufficiently higher than the test pressure. |
Pilot pressure source |
Applies 400 to 700kPa of clean air. |
CPU |
Cortex-A9 800MHz 512MB DDR3 |
Pipe connection diameter |
Rc1/4 (test pressure supply, pilot air supply, workpiece piping, master piping) |
Ambient temperature |
Operating temperature 5 to 45°C Storage temperature: -20 to 60°C |
Humidity |
80 %RH or less No dew condensation |
Mass |
Approx. 140kg (standard specifications) |
Serial communications RS232C-based
(D-sub9-pin)
2 port |
I/F fixed length output |
Leak data and set values are outputted simultaneously |
ID/F fixed length output
Standard settings |
Leak data and set values are outputted simultaneously |
T/F fixed length output |
Only leak data outputted |
USB Port |
Saving data |
Saves decisions, leak values, correction values, test pressure, WK#, CH#, and time on inserted memory.
(Automatic file creation every 24 hours) |
Set values storage |
All channel settings, system settings, etc. |
Standard accessories |
Power cord |
For use in Japan: Rating: AC125V/7A, length: 3m
For export: Rating: AC240V/10A, length: 2m (CE conformant product)
|
Interface connector (I/O), caps (2) for RS-232C, USB cover, test report, traceability documents, user manual |
Peripherals |
Master chamber, leak master, bypass unit, external exhaust valve, etc.
|