| Differential pressure |
Minimum display
Differential pressure range
Excess pressure on sensors |
0.1 Pa（Standard）
±1500 Pa（Standard）
5 MPa |
| Display units |
Test Pressure |
kPa, MPa, （PSI, kg/cm2, bar,mbar, mmHg, cmHg, inHg）※ |
| Leak volume |
Pa, kPa, mL/s, mL/min, L/min, （mmH2O, inH2O, mmHg, in3/min,in3/d）※ |
| Volume |
mL, L, （in3）※ ※Contents in the parentheses are not displayed for SI units. |
| Number of Stations |
Up to 8 stations(ST) |
| Number of Channels |
32 channels (0 to 32) per station |
| Timer setting range |
999.9 seconds (resolving power: 0.1 second) |
| Power source |
Controller |
AC100～240 V±10%, 50/60 Hz 、100 VA max, |
| Pneumatic Circuit Unit |
AC100～240 V±10%, 50/60 Hz 、50 VA max, |
| Test pressure source |
Uses clean air.The original pressure must be sufficiently higher than the test pressure. |
| Pilot pressure source |
Applies 400 to 700 kPa of clean air. |
| Pipe connection diameter |
Rc 1/4 (Pressure source, WORK pipes, MASTER pipes, Pilot pressure source) |
| Weight |
Controller: 8.5 kg Pneumatic Circuit Unit 7kg (LU-80A) |
| Standard Accessories |
Interface connector, Power cord (125VAC 3m for controller, 3m for Pneumatic Circuit Unit, High voltage cable is an option) Inspection Record, Traceability documents, Operation Manual |